Changing Resolution

There are times that you may need to adjust the image resolution of your video, especially if you have analog and HD IP cameras in the same environment. In Synergy, this is done by changing the image's aspect ratio. Aspect ratio is the ratio of the width to the height of an image.

Click the Change Resolution button on the Video menu. The Change Image Resolution dialog appears.

Make a selection from the Mode drop-down menu. If you select Apply Aspect Ratio or Apply Ratio and Fill Screen, you must make a selection from the Override Ratio drop-down menu.

4:3 represents a traditional image proportion and 16:9 represents a widescreen effect. Click Apply. The following table describes the mode options.

Mode	Description
Fill Synergy Screen	Fills the Video Window with the image.
Apply Aspect Ratio	Applies the selected Override Ratio to the camera image.
Apply Ratio and Fill Screen	Applies the selected Override Ratio to the camera image and zooms the image so that it fills the Video Window.
Show Raw Image Size	Displays the image at the camera resolution and aspect ratio, providing the crispest image.

Note: Modifying the aspect ratio will affect the true to life representation of the display video.

Note: To override all settings and fix the aspect ratio of a Display Wall unit, certain client configuration is required on the unit. For information, contact your Synergy system administrator.

Visit us online at www.synecticsglobal.com